Configuring a D-Link DIR-615 Router

Configuring Your Router

STEP 1 (a): Connect Your PC to the Router

• Unbox the router and power up the router.
• Connect the Act internet cable to the WAN/Internet port (different colored port)of the router.
• An extra cable will be available with the router, take LAN cable connect one end to the LANport(1- 4) Of the router (any one port) and one end to the PC or Laptop.
• In the system press key & R key together to open Run dialog box.
• Type ipconfig on the command prompt (Black screen). The default gateway of the LAN or Ethernet adapter will be the Router address. (Ex:192.168.1.1)
• 

STEP 1 (b): Connect Your Mobile

• Switch on the router and connect ACT internet cable to the WAN/Internet port of the router
• Go to setting in the Mobile, turn on Wi-Fi and wait until the mobile detects router name press the router name to connect.
• If the router is already configured and the Wi-Fi password is known then go to settings in the Mobile
• Under “Wireless and Networks”, press Wi-Fi make sure "Wi-Fi" is turned on.
• Type ipconfig on the command prompt (Black screen). The default gateway of the LAN or Ethernet adapter will be the Router address. (Ex:192.168.1.1)
• Wait until the mobile detects router name press the router name if prompted enter the Wi-Fi password and press Connect.

NOTE

• Every Router Configuration has two parts
  • – Configuring the Internet Part, where we tell the Router how to connect to the internet.
  • – Configuring the Wi-Fi Part, where we decide the name and password with which we connect to the Router
• Internet Configuration shown here will guide to configure the Router in PPPoE.
  • – This will enable you to browse internet directly, every time you connect to the router. No need to login again and again.
• Wi-Fi Configuration has also been given, in order to ease the process of you connecting to the Router
  • –SSID and Password Creation have been explained

STEP 2: Logging into the Router

• Open a browser Enter the below IP Address in the Address Bar. A login page appears. The usual usernames and passwords are given in the table below.

• Router Name	IP Address	Username	Password
  Cisco or Linksys	192.168.1.1	admin	admin
  D-Link	192.168.0.1	admin	(blank)
  TP-Link	192.168.0.1	admin	admin
  Net gear	192.168.1.1	admin	password
  Belkin	192.168.2.1	Click on Login in Home	(blank)
  Tenda	192.168.0.1	admin	admin
  i-Ball Baton	192.168.1.1	admin	admin
  Digisol	192.168.2.1	admin	1234 or admin
  Asus	192.168.1.1	admin	admin

  If all the above credentials do not work, please check the back of the router wherethe username and password will be mentioned.

STEP 2: Home Page after Logging into theRouter

• 

Internet Connectivity – PPPoE Configuration

• 

  In network settings, choose 2 PPPoE, enter ACT login ID and password and then clickapply.

• 

  In network settings, choose WLAN settings and assign the SSID for the router. SSID is the Router Name you want to give.

  Next go to WLAN security and choose the encryption mode and password, then click on apply

Changes to be made after Configuration

• If the Wi-Fi password is changed, we need to update the password in all the devices to get connected to the Internet.
• Changes in PC
  • – Windows 7: Click on Windows button click on Control Panel click on Network and Internet click on Network and Sharing Centre.
  • – In the Tasks pane(Left side of screen), click Manage wireless networks
  • – Right-click the router name click Remove network click on OK.
  • – Click on Network icon (right bottom corner next to system Time), click on Router name and enter the new Wi-Fi password and Connect.
• Changes in PC
  • – Win 8, 8.1: Click on Network icon (right bottom corner next to system Time), Right click on Router name click on “Forget this network”. Again click on Router name, enter the new Wi-Fi password and Connect.
  • – Win 10: Click on Network icon(right bottom corner next to system Time), click on Network settings under Wi-Fi click on Manage known Networks Click on your Router name and Click on Forget, and again click on Network icon click on Router name enter the new Wi-Fi password and Connect
• Mobile or Tablet
  • – Go to ‘Settings’ in Mobile, turn on Wi-Fi and long press on your Router name and press “Forget network”. Again press the router name. You will be prompted to enter the Wi-Fi password. Enter the Password and Connect.