₹50 CASHBACK
FREE TRIAL
34% OFF
25% OFF
25% OFF
FREE TRIAL
The internet speed is fastest when the device is directly connected to an Ethernet cable. We recommend you check the manufacturer website for the speed supported by your router. TP-Link, Dlink, Tendacn.com.
Take Inputs from Technology team for an update on the speed supported
Below is a step by step process of changing your router password for your ACT Fibernet broadband connection. It is recommended that you change your password frequently to secure your Wi-Fi connection.
TP-Link:
Login to Router admin panel using its default IP Address – 192.168.0.1 / 192.168.1.1.
Enter the default username and password (admin/admin in most cases).
Navigate to Wireless > Wireless Security > WPA/WPA2 – Personal (Recommended) > Password.
Enter your preferred password and Save the change.
D-Link:
Login to your router settings page via its default IP Address – 192.168.1.1 / 192.168.0.1.
Input your username and password (or here’s list of default username and password).
Go to Wireless > Wireless Security > Security Mode set to WPA2 only > Pre-Shared Key: enter your preferred password.
Apply the change > restart your Wi-Fi and the new password will be applied.
NETGEAR:
Open your router setup page using its default IP address – 192.168.1.1 / 192.168.0.1 / https://www.netgear.com/home/services/routerlogincom.html.
For authentication enter default username and password.
Go to Wireless > Security Options > Select WPA2-PSK [AES] > Now enter your preferred password in Passphrase.
Apply chances and reboot your Wi-Fi for changes to effect.
D-Link DIR-615 Basic Configuration Guide (PDF | 714 KB)
D-Link DIR-816 - Basic Configuration Guide (PDF | 835 KB)
D-Link DIR-816 - Firmware Configuration Guide (PDF | 399 KB)
D-Link DIR-816 - Firmware v1.0.6 (BIN | 406 KB)
D-Link DIR-825 Basic Configuration Guide (PDF | 1.25 MB)
